American Dynamics RHODULP-02 Specifikace

Procházejte online nebo si stáhněte Specifikace pro Bezpečnostní kamery American Dynamics RHODULP-02. American Dynamics RHODULP-02 Specifications Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 10
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
SPEEDDOME ULTRA PRESSURIZED OUTDOOR DOME HOUSING 8200-0462-01, REV. B
INSTALLATION AND SERVICE GUIDE
1 of 10
SpeedDome
®
Ultra
Pressurized Outdoor
Dome Housing
Installation and Service Guide
RHODULP-01 (clear bubble)
RHODULP-02 (smoked bubble)
Contents
About this Guide ............................................................ 1
If you need assistance............................................ 1
About the Product.......................................................... 1
Important Safeguards .................................................... 2
Unpacking .............................................................. 2
Installation ..................................................................... 3
Mounting the Housing............................................. 3
Calibrating the Pressure Sensor............................. 4
Installing the Dome................................................. 5
Installing the Desiccant Bag Bracket ..................... 5
Attaching the Bubble .............................................. 6
Pressurizing the Housing........................................ 6
Servicing the Pressurized Housing......................... 7
Reference ...................................................................... 8
Wiring Color Code .................................................. 8
Exploded View of Housing...................................... 9
Specifications .............................................................. 10
Declarations................................................................. 10
© 2005 Sensormatic Electronics Corp.
About this Guide
This guide explains how to install and service the
pressurized outdoor dome housing.
The exclamation point within an
equilateral triangle is intended to alert
the user to presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the outdoor dome.
If you need assistance...
Contact your Sales Representative.
Note: This housing is designed to
operate with the bubble pointing
down. Installing the housing upside
down can damage its internal
equipment, and will void the
warranty.
About the Product
The outdoor housing is pressurized with dry
nitrogen to eliminate the effects of moisture, dust,
insects, and corrosive exhaust fumes on the CCTV
camera. Dry nitrogen is added during installation.
The housing is pre-wired for RS-422 Installations.
See the “Reference” section in this guide for details
on how to configure the housing on SensorNet/
Manchester networks.
Note: This product is equipped with an absolute
low-pressure sensor. The sensor is connected to
IO PCB ALARM INPUT 1 and can be used to
detect if pressure inside the housing is less than
0.5psi. The sensor will open at 0.5psi and close at
1psi. See “Calibrating the Pressure Sensor”
section in this guide for details on how to calibrate
the sensor. Also, consult the controller’s operation
guide for details on how to program the alarm
input.
Zobrazit stránku 0
1 2 3 4 5 6 7 8 9 10

Shrnutí obsahu

Strany 1 - Dome Housing

SPEEDDOME ULTRA PRESSURIZED OUTDOOR DOME HOUSING 8200-0462-01, REV. B INSTALLATION AND SERVICE GUIDE 1 of 10 SpeedDome® Ultra Pressurized Outdoor Do

Strany 2 - Important Safeguards

SPEEDDOME ULTRA PRESSURIZED OUTDOOR DOME HOUSING 8200-0462-01, REV. B INSTALLATION AND SERVICE GUIDE 10 of 10 Specifications Electrical Power input.

Strany 3 - Installation

SPEEDDOME ULTRA PRESSURIZED OUTDOOR DOME HOUSING 8200-0462-01, REV. B INSTALLATION AND SERVICE GUIDE 2 of 10 Important Safeguards CAUTION: The housi

Strany 4

SPEEDDOME ULTRA PRESSURIZED OUTDOOR DOME HOUSING 8200-0462-01, REV. B INSTALLATION AND SERVICE GUIDE 3 of 10 Installation Note: This section assumes

Strany 5 - Installing the

SPEEDDOME ULTRA PRESSURIZED OUTDOOR DOME HOUSING 8200-0462-01, REV. B INSTALLATION AND SERVICE GUIDE 4 of 10 8. Remove the bubble assembly from the

Strany 6 - Pressurizing the Housing

SPEEDDOME ULTRA PRESSURIZED OUTDOOR DOME HOUSING 8200-0462-01, REV. B INSTALLATION AND SERVICE GUIDE 5 of 10 Installing the Dome Connect the dome ca

Strany 7 - Housing

SPEEDDOME ULTRA PRESSURIZED OUTDOOR DOME HOUSING 8200-0462-01, REV. B INSTALLATION AND SERVICE GUIDE 6 of 10 Attaching the Bubble 1. Line up tabs i

Strany 8 - Reference

SPEEDDOME ULTRA PRESSURIZED OUTDOOR DOME HOUSING 8200-0462-01, REV. B INSTALLATION AND SERVICE GUIDE 7 of 10 Purge Procedure 1. Set the regulator g

Strany 9 - Exploded View of Housing

SPEEDDOME ULTRA PRESSURIZED OUTDOOR DOME HOUSING 8200-0462-01, REV. B INSTALLATION AND SERVICE GUIDE 8 of 10 Reference Wiring Color Code Wiring Colo

Strany 10 - Declarations

SPEEDDOME ULTRA PRESSURIZED OUTDOOR DOME HOUSING 8200-0462-01, REV. B INSTALLATION AND SERVICE GUIDE 9 of 10 Exploded View of Housing Parts List 1.

Komentáře k této Příručce

Žádné komentáře